When others are long gone this very-well made in the USA product will still be vibrant and structurally sound in every way. Built better to last longer. Enjoy the peace-ofmind that comes with products designed for educational use.
Frame: All-tubular swaged design, 1-1/4” diameter, 16-gauge tubing swaged to 7/8” for leg supports. Un-swaged leg designs are not acceptable. Legs swaged smaller than 7/8” must use external gripping glide attachments. A 1”, 16-gauge side brace is 360-degree arc-welded to both front and rear leg support and top support. A 1”, 16- gauge back support is multiple arc-welded to the leg and top support. A 1-1/4”, 16-gauge top support is arc-welded integrally with all tube parts for maximum structural integrity. Minimum 3-1/2 feet of total weld. Frame is chrome plated after all welding is complete. The frame shall be contoured to conform to the shape of the seat-back to accept uniform attachments.
Frame Finish:Bright Nickel Chrome finish on frames will be derived from a Hexa-valent process with not less than 4-6 mils of Nickel base for hardness and durability. Tri-valent (soft-chrome) finishes are not acceptable. Hexa-valent finishes with less than 4-6 mils of Nickel are not acceptable.
Seat & Back Attachments: Both seat and back are attached through punched holes in tubular frame using self-tapping screws into four uniformly drilled holes. Seats and backs shall be attached in four places each without the use of spacers, washers or noise reducers (attachment systems that create any noise without these devices are not acceptable).
Seat & Back: Only 5/8” thick posture contoured solid molded thermo-set plastic with smooth molded edges and permanent color throughout thickness shall be used. Seat size is at least 16” wide x 15-1/2” deep. Back size is at least 14” wide x 6-1/2” high on all chair heights. Both seat and back must be attached through punched holes on a contoured tubular frame using self-tapping screws into four uniformly drilled holes.
Glides: Nylon or steel, your choice. Swivel design, case hardened steel, super silent deep ferrule. All glides make full level contact with floor. Designed so the maximum swivel angle of the glide is not violated. >
Specifications:
- H-Frame design
- 5/8" posture-contoured hard plastic
- Spacerless plastic attachment
- Long-ferrule inside-holding nylon glides
- Through-screw plastic attachment
- Plateable-quality heavy-gauge steel
- High-quality finish
- Superior extra-long welds
- Safe, bracketless, continuous all-tubular frame
- Overall Dimensions: 36"D x 24"W x 29-1/2"H
Ships, and must be ordered, in increments of 2 (i.e. 2,4,6,8, etc...)
Price listed above is for 1 unit
Click here to view Seat Specifications
Bulk Discounts Available - Please Call 800-225-2517 or email info@wrhardware.com
Minimum order of 10 Desks
 |
Additional images |
| |
|
|
|
School Furniture 
Cart is empty
