Smith System School Furniture

Smith System School Furniture
$159.75
The single-student Planner Desk is a classroom performer for several reasons. It's a classroom performer because of its strength and stability. It's designed to accommodate loads of up to 200 lbs. The strength to handle heavy books and equipment comes from its signature "H" frame construction and substantial work surface. Its box-welded modesty panel adds even more rigidity. The 7/8" thick work surface consists of a 45 lb. density particle 6" board core with a Hard Plastic surface and a . 020" melamine backer sheet. The edge of the work surface features 1/4" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The frame is attached to the pre-drilled holes in the top with (12) #10 x 5/8" screws through a 3-1/8"W x 18"L 14-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 14-gauge steel tube legs which is welded to a 1" square 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 22" to 32" in 1" increments. The adjustment for each leg is secured with (2) 3"-16 x . 675" Allen screws. The right and left leg both include the Smith System patented backpack peg allowing for either inside or outside positioning. The legs are tied together for added strength with a 6" high 18-gauge steel panel and (4) Connector Bolts. Legs have 1" adjusting leveling glides. Minimum order of 10 desks Shown with Optional Chair, Model 02600 (See Below)

$546.31
FREE SHIPPING
Focusing on lessongs can be a challenge for students of all ages. These carrels can be a great solution to this problem. These versatile carrels can be switched from desk height to kiosk height by simply reversing the back panel. Its work surface can easily support a computer and offers cutouts to accommodate computer wiring. Set the work surface at 28" high to serve as a desk/workstation or at 36" high to serve as a kiosk for patron use. A modular unit, it offers unlimited expandability. Materials: The 1" thick work surface consists of a 45-lb. high-density particle board core with a . 030" high-pressure laminate surface and a . 020" melamine backer sheet. The edge of the work surface comes pre-drilled for ease of installation and is finished with a 3/8" edge t-molding. The 1" thick side panels consists of the same 45-lb. high-density particle board core with a . 030" high-pressure laminate on both sides, and the edge if wrapped with a 3/8" t-mold. Each of the side panels is finished with a 16-gauge 1" x 2" steel foot that has nylon end caps with 1" adjustable leveling glides that provide stability on uneven floors. The back panel is an 18-gauge steel panel and is reversible to allow the user to set the work surface at either a 28" desk height for sitting or a 36" kiosk height for standing. For added strength the side panels are tied togetehr with a 14-gauge steel tube cross bar at the foot.

$480.45
FREE SHIPPING
Teachers, school administrators and librarians are won over by this Heavy-Duty Book Cart's multi-functionality and super strength. Load these carts up with 600 lbs. of books, equipment, art supplies, student work, and just about anything else they're ready to go to work anywhere in your school. Another feature people love: the fixed middle casters that allow the cart to pivot on an axis. This makes it easier to raise the leading casters over thresholds and into elevators, even when the cart is fully loaded. Need to make tight turns? This Heavy-Duty Book Cart does it with little effort. Specifications: Double sided sloping shelves that are 34" long x 7-1/2" deep on each side 6" high back. Flat Shelf is 34" long x 17" wide 12" clearance between shelves All welded steel carts have 18 gauge shelves with 1" C' brake at front End panels have 18 gauge steel full height panels welded to 1" square 18 gauge steel tubing with formed in handle with radius for comfort and ease of movement Carts feature 4" diameter dual wheel casters with soft tread for quiet operation. Dual wheels have no saddle that may damage surrounding furniture Overall Dimensions: 18"D x 36"W x 44"H Weight: 84 lbs

$422.62
FREE SHIPPING
Focusing on lessongs can be a challenge for students of all ages. These carrels can be a great solution to this problem. These versatile carrels can be switched from desk height to kiosk height by simply reversing the back panel. Its work surface can easily support a computer and offers cutouts to accommodate computer wiring. Set the work surface at 28" high to serve as a desk/workstation or at 36" high to serve as a kiosk for patron use. A modular unit, it offers unlimited expandability. This is an adder piece that requires to connect to a Carrel Starter or another Carrel Adder piece connected to a starter piece. Materials: The 1" thick work surface consists of a 45-lb. high-density particle board core with a . 030" high-pressure laminate surface and a . 020" melamine backer sheet. The edge of the work surface comes pre-drilled for ease of installation and is finished with a 3/8" edge t-molding. The 1" thick side panels consists of the same 45-lb. high-density particle board core with a . 030" high-pressure laminate on both sides, and the edge if wrapped with a 3/8" t-mold. Each of the side panels is finished with a 16-gauge 1" x 2" steel foot that has nylon end caps with 1" adjustable leveling glides that provide stability on uneven floors. The back panel is an 18-gauge steel panel and is reversible to allow the user to set the work surface at either a 28" desk height for sitting or a 36" kiosk height for standing. For added strength the side panels are tied togetehr with a 14-gauge steel tube cross bar at the foot.

$207.80
These Husky Trapezoid style tables are ideal for bringing students together to work on a project. Husky legs are 1-3/4" diameter 17-gauge steel tubing with sock style nylon glide. Telescoping legs adjust on 1" centers 21"-30" high. Minimum order of 10 tables

$47.85
It wasn't just current fashion that shaped the new Flavors Seating. It was also influenced by the demands of the active classroom: Students today don't always face the front, so the Flavors Chair offers comfort to the student facing back or front, left or right. Similarly, the back of the Flavors Chair offers just the right amount of flex to allow the student to move and adjust their posture, which promotes better concentration. Features The shell rests on the frame, not rivets, to add comfort High-density poly propylene with color throughout the shell Durable glides with non-staining nylon bases come standard, or choose optional felt glides The legs are strong, 18-gauge welded steel with a durable chrome finish Weight: 7lbs Seat Height: 10" Stacks (5) chairs high Typically ships within five days to two weeks. Minimum order is (6) chairs.

$195.41
Our Trapezoid Activity Table measures 60"w x 30"d. The table height is adjustable from 21" to 30". Adjusts in 1" increments and feature quick mounting plates for easy assembly. Material: The upper leg is made of a 18-gauge 1-1/8" diameter steel tube, protected by a durable powdercoat finish. The 1/4" "V" support brace is welded to the top leg and a 16-gauge mounting plate, which adds stability and strength. Legs attached to an easy-on bracket that is already mounted to the desktop requiring only 1 screw per leg for secure assembly. The 16-gauge 1" diameter steel tube lower leg is chrome-plated tube to resist scuffing. The telescoping leg adjusts in 1" increments, and is tapered to a 5/8" diamater to accept the outside-hold glides. All glides feature outside-hold design which stays stronger and lasts longer, and feature a swivel base and chrome plated steel cover. Worksurface: The 1-1/4" thick work surface consists of a 45 lb. high-density core with a 0. 030" high pressure laminate surface and a 0. 020" backer sheet for balance. The edge features a 3/8" thick bumper edge molding mechanically fasted every 6"-8" to assure a long lasting fit. Tops have easy on brackets for quick assembly of leg sets. Minimum order of 10 tables

$407.95
These sturdy, well-built tables can handle anything your students can dish out. Horseshoe shape is great for hands-on teaching with several students. Place back-to-back for great inclusion of all students. To tailor the height of the table to the size of students from K-Adult, choose legs from three height ranges, 11"-16"h, 15"-24"h or 21"-30"h. All adjust in 1" increments and feature quick mounting plates for easy assembly. Material: The upper leg is made of a 18-gauge 1-1/8" diameter steel tube, protected by a durable powdercoat finish. The 1/4" "V" support brace is welded to the top leg and a 16-gauge mounting plate, which adds stability and strength. Legs attached to an easy-on bracket that is already mounted to the desktop requiring only 1 screw per leg for secure assembly. The 16-gauge 1" diameter steel tube lower leg is chrome-plated tube to resist scuffing. The telescoping leg adjusts in 1" increments, and is tapered to a 5/8" diamater to accept the outside-hold glides. All glides feature outside-hold design which stays stronger and lasts longer, and feature a swivel base and chrome plated steel cover. Worksurface: The 1-1/4" thick work surface consists of a 45 lb. high-density core with a 0. 030" high pressure laminate surface and a 0. 020" backer sheet for balance. The edge features a 3/8" thick bumper edge molding mechanically fasted every 6"-8" to assure a long lasting fit. Tops have easy on brackets for quick assembly of leg sets. Minimum order of 10 tables

$231.84
Adjustable legs add flexibility and meet height requirements for K-adult, adjusting from 22" to 30" high. Legs are 1-3/4" diameter 17-gauge steel tubing. Telescoping legs adjust on 1" centers. Legs are secured to top with mounting brackets pre-installed in tops. Minimum order of 10 desks

$505.30
FREE SHIPPING
Teachers, school administrators and librarians are won over by this Heavy-Duty Book Cart's multi-functionality and super strength. Load these carts up with 600 lbs. of books, equipment, art supplies, student work, and just about anything else they're ready to go to work anywhere in your school. Another feature people love: the fixed middle casters that allow the cart to pivot on an axis. This makes it easier to raise the leading casters over thresholds and into elevators, even when the cart is fully loaded. Need to make tight turns? This Heavy-Duty Book Cart does it with little effort. Specifications: Double sided sloping shelves that are 34" long x 7-1/2" deep on each side 6" high back. Flat shelves are 34" long x 17" wide. 12" clearance between shelves. All welded steel carts have 18 gauge shelves with 1" C' brake at front. End panels have 18 gauge steel full height panels welded to 1" square 18 gauge steel tubing with formed in handle with radius for comfort and ease of movement. Carts feature 4" diameter dual wheel casters with soft tread for quiet operation. Dual wheels have no saddle that may damage surrounding furniture. Overall Dimensions: 18"D x 36"W x 44"H Weight: 89 lbs.

$147.28
The single-student Planner Desk is a classroom performer for several reasons. It's a classroom performer because of its strength and stability. It's designed to accommodate loads of up to 200 lbs. The strength to handle heavy books and equipment comes from its signature "H" frame construction and substantial work surface. Its box-welded modesty panel adds even more rigidity. The 7/8" thick work surface consists of a 45 lb. density particle 6" board core with a . 030 high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 1/4" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The frame is attached to the pre-drilled holes in the top with (12) #10 x 5/8" screws through a 3-1/8"W x 18"L 14-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 14-gauge steel tube legs which is welded to a 1" square 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 22" to 32" in 1" increments. The adjustment for each leg is secured with (2) 3"-16 x . 675" Allen screws. The right and left leg both include the Smith System patented backpack peg allowing for either inside or outside positioning. The legs are tied together for added strength with a 6" high 18-gauge steel panel and (4) Connector Bolts. Legs have 1" adjusting leveling glides. Minimum order of 10 desks

$219.45
By defining a place at the table for four students, our Clover Activity Table helps keep young students settled and on task. To tailor the height of the table to the size of students from K and up, choose legs from three height ranges, 11"-16"h, 15"-24"h or 21"-30"h. All adjust in 1" increments and feature quick mounting plates for easy assembly. Material: The upper leg is made of a 18-gauge 1-1/8" diameter steel tube, protected by a durable powdercoat finish. The 1/4" "V" support brace is welded to the top leg and a 16-gauge mounting plate, which adds stability and strength. Legs attached to an easy-on bracket that is already mounted to the desktop requiring only 1 screw per leg for secure assembly. The 16-gauge 1" diameter steel tube lower leg is chrome-plated tube to resist scuffing. The telescoping leg adjusts in 1" increments, and is tapered to a 5/8" diamater to accept the outside-hold glides. All glides feature outside-hold design which stays stronger and lasts longer, and feature a swivel base and chrome plated steel cover. Worksurface: The 1-1/4" thick work surface consists of a 45 lb. high-density core with a 0. 030" high pressure laminate surface and a 0. 020" backer sheet for balance. The edge features a 3/8" thick bumper edge molding mechanically fasted every 6"-8" to assure a long lasting fit. Tops have easy on brackets for quick assembly of leg sets. Minimum order of 10 desks

$195.41
Our Trapezoid Activity Table measures 60"w x 30"d. The table height is adjustable from 15" to 24". Adjusts in 1" increments and feature quick mounting plates for easy assembly. The top of a Trapezoid Activity Table is 1-1/4" thick, with a high-pressure laminate bonded to a 45-lb. particle board core with backer sheet. The top also features a 3/8" thick bumper edge with rounded corners and edges, protecting the surface, and students from bumps and scratches. Minimum order of 10 desks

$350.25
Adjustable legs add flexibility and meet height requirements for K-adult, adjusting from 22" to 30" high. Legs are 1-3/4" diameter 17-gauge steel tubing. Telescoping legs adjust on 1" centers. Legs are secured to top with mounting brackets pre-installed in tops. Minimum order of 10 tables

$223.86
The round shape is great for hands-on activities and teaching several students. The height adjusts from 15 to 24". Adjusts in 1" increments and features quick mounting plates for easy assembly. Table tops are 1-1/4" thick, with a high-pressure laminate bonded to a 45-lb. particle board core with backer sheet. Tops also feature a 3/8" thick bumper edge with rounded corners and edges, protecting the surface, and students, from bumps and scratches. Minimum order of 10 desks

$153.09
These sturdy, well-built tables can handle anything your students can dish out. Rectangle is the classic shape for activities and hands-on teaching with several students. This Table Adjusts in height from 15" to 24". The legs adjust in 1" increments and feature quick mounting plates for easy assembly. Table tops are 1-1/4" thick, with a high-pressure laminate bonded to a 45-lb. particle board core with backer sheet. Tops also feature a 3/8" thick bumper edge with rounded corners and edges, protecting the surface and students from bumps and scratches. Minimum order of 10 tables

$153.09
These sturdy, well-built tables can handle anything your students can dish out. Rectangle is the classic shape for activities and hands-on teaching with several students. This Table Adjusts in height from 21 to 30". The legs adjust in 1" increments and feature quick mounting plates for easy assembly. Table tops are 1-1/4" thick, with a high-pressure laminate bonded to a 45-lb. particle board core with backer sheet. Tops also feature a 3/8" thick bumper edge with rounded corners and edges, protecting the surface and students from bumps and scratches. Minimum order of 10 tables

$280.15
The trapezoid shape allows a great floor plan flexibility. Put two together to create a hexagon that seats six students. Put four together for an eight-student group. The heavy-duty construction contributes to a sturdy work surface that won't sag, and a leveling glide on each table leg allows for stability on uneven floors. The Planner Activity Table is shipped ready to assemble. The Planner Activity Table accommodates lower grades to ADA. The 1 " thick work surface consists of a 45 lb. density particle board core with a . 030 high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 3/8" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The legs are attached to the pre-drilled holes in the top with (16) #10 x 5/8" wood screws through a 3 "W x 28 34"L 12-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 12-gauge steel tube legs which is welded to a 1" x 2" 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 24" to 34" in 1" increments. Leveling glides are on each table leg allowing for stability on uneven floors. The adjustment for each leg is secured with (2) 3"-16 x . 675" Allen screws. The center support channel is 2" x 3" 14-gauge steel, with 11-gauge steel end plates for maximum stability. The support channel is connected to the legs by (4) connector bolts. Minimum order of 10 tables Shown with Optional Chair, Model 00520 (see below)