Smith System School Furniture

Smith System School Furniture
$327.00
The Half-Moon shape facilitates hands-on teaching with small groups of students. When placed back-to-back, a full circle is created for larger group work. The heavy-duty construction contributes to a sturdy work surface that won't sag, and a leveling glide on each table leg allows for stability on uneven floors. The Planner Activity Table is shipped ready to assemble. The Planner Activity Table accommodates lower grades to ADA. The 1 " thick work surface consists of a 45 lb. density particle board core with a . 030 high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 3/8" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The legs are attached to the pre-drilled holes in the top with (16) #10 x 5/8" wood screws through a 3 "W x 28 34"L 12-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 12-gauge steel tube legs which is welded to a 1" x 2" 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 24" to 34" in 1" increments. Leveling glides are on each table leg allowing for stability on uneven floors. The adjustment for each leg is secured with (2) 3"-16 x . 675" Allen screws. The center support channel is 2" x 3" 14-gauge steel, with 11-gauge steel end plates for maximum stability. The support channel is connected to the legs by (4) connector bolts. Minimum order of 10 desks Shown with Optional Chair, Model 00520 (see below)

$611.40
FREE SHIPPING
Access Workstations feature everything you need in computer workstation furniture, particularly sturdy construction. You'll find all the dependability you want in computer workstation furniture: Its laminated surface stays smart after years of use, and its adjustable steel legs won't bend under the weight of computer equipment. Lift-up doors on the cable port means there's no more bending down or crawling on the floor to manage wires. Worksurface: The 1-1/4" thick work surface consists of a 45-lb. high-density particle board core with a . 030" high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 3/8" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. Legs: The legs are attached to the pre-drilled holes in the top with 12, #10 5/8" screws through a 3-1/8"W x 18"L 14-gauge steel mounting plate. The mounting plate is welded to 2, 1" square 14-gauge steel tube legs which is welded to a 1" square 14-gauge steel tube and adjust in height from 22" to 32" in 1" increments. the adjustment for each leg is secured with 2, 3/4" - 16 x . 675 Allen screws. The right and left leg both include the Smith System patented backpack peg allowing for either inside or outside positioning. the legs are tied together for added strength with a 6" high 18-gauge steel panel and 4, Connector Bolts. Legs have 1" adjusting leveling glides. Wire Management: Access comes with a keylocking 6" deep access door that is accessible from the top side of the unit. The 6" deep has cutouts for wire management. Below the door is a fully welded wire manager that is 5-3/8" x 6". the manager has grommet holes in the end to allow wires to be run from station to station with no exposed wiring. Access slots in the front allow easy CPU cable routing into the manager.

$161.86
The single-student Planner Desk is a classroom performer for several reasons. It's a classroom performer because of its strength and stability. It's designed to accommodate loads of up to 200 lbs. The strength to handle heavy books and equipment comes from its signature "H" frame construction and substantial work surface. Its box-welded modesty panel adds even more rigidity. The 7/8" thick work surface consists of a 45 lb. density particle 6" board core with a . 030 high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 1/4" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The frame is attached to the pre-drilled holes in the top with (12) #10 x 5/8" screws through a 3-1/8"W x 18"L 14-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 14-gauge steel tube legs which is welded to a 1" square 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 22" to 32" in 1" increments. The adjustment for each leg is secured with (2) 3-3/4"-16 x . 675" Allen screws. The right and left leg both include the Smith System patented backpack peg allowing for either inside or outside positioning. The legs are tied together for added strength with a 6" high 18-gauge steel panel and (4) Connector Bolts. Legs have 1" adjusting leveling glides. Minimum order of 10 desks

$70.95
Shaped by the demands of cooperative learning the Intuit Sled Base Chair invites students to come, sit and learn. Its ample dimensions make students of all sizes comfortable throughout the day. The Intuit Chair is the latest expression of furniture that contributes to a healthy, effective learning environment. Its sled base makes it easy for the chair to be placed on top of the desk. Platinum powder-coated steel frame. The shell is made from virgin polypropylene with color throughout and a distinct texture to prevent slipping. The free flowing design of the Intuit comes from the innovative use of Gas Injection Technology. The integrated handle eases classroom positioning. The frame is constructed from 11-gauge, 1-1/8" diameter steel tube, protected by a durable powder coat finish, and is MIG-welded for maximum strength. The tubular frame supports the perimeter of the shell and incorporates a reinforcing crossbar for added strength. Seat height is 13". No sharp edges around handle The light texture on the chair surface resists scratches Mig-welded 16-gauge steel frame The shell rests on the frame Powdercoat frame Minimum order of 6 chairs

$365.50
Our Art Table offers beefy construction to stand firm under everything from heavy clay sculptures to vigorous erasing. It boasts a frame of 1" x 2" 14-gauge steel tube cross supports welded to 11-gauge steel mounting plate and 1-1/4" square, 12-gauge steel legs. This all supports a 1-1/4" thick work surface, topped with high-pressure laminate and surrounded by 3/8" thick edge bumpers. Work Surface: Table top is 1-1/4" thick with high-pressure laminate surface and radius corners. 45 lb. high-density particle board core with backer sheet for balance. Tough 3/8" thick bumper edge molding with horizontal radius for comfort is stapled in place every 8" Frame: 1" x 2", 14-gauge steel tube cross supports welded to 11-gauge steel mounting plate and 1-1/4" square, 12-gauge steel legs. Center support channel of 2" x 3" 14-gauge steel. Features two support channels for added stability. Steel components have tough powdercoat finish. Chrome-plated 1" square 14-gauge lower legs resist scuffing. Minimum order of 10 desks

$266.86
The Half-Moon shape facilitates hands-on teaching with small groups of students. When placed back-to-back, a full circle is created for larger group work. Sturdy and well-built, Half-Moon Tables can handle anything your students can dish out. To tailor the height of the table to the size of students from K-Adult, choose legs from three height ranges, 11"-16"h, 15"-24"h or 21"-30"h. All adjust in 1" increments and feature quick mounting plates for easy assembly. Material: The upper leg is made of a 18-gauge 1-1/8" diameter steel tube, protected by a durable powdercoat finish. The 1/4" "V" support brace is welded to the top leg and a 16-gauge mounting plate, which adds stability and strength. Legs attached to an easy-on bracket that is already mounted to the desktop requiring only 1 screw per leg for secure assembly. The 16-gauge 1" diameter steel tube lower leg is chrome-plated tube to resist scuffing. The telescoping leg adjusts in 1" increments, and is tapered to a 5/8" diamater to accept the outside-hold glides. All glides feature outside-hold design which stays stronger and lasts longer, and feature a swivel base and chrome plated steel cover. Worksurface: The 1-1/4" thick work surface consists of a 45 lb. high-density core with a 0. 030" high pressure laminate surface and a 0. 020" backer sheet for balance. The edge features a 3/8" thick bumper edge molding mechanically fasted every 6"-8" to assure a long lasting fit. Tops have easy on brackets for quick assembly of leg sets. Chairs pictured Not Included Minimum order of 10 tables

$366.03
Our Art Table offers beefy construction to stand firm under everything from heavy clay sculptures to vigorous erasing. It boasts a frame of 1" x 2" 14-gauge steel tube cross supports welded to 11-gauge steel mounting plate and 1-1/4" square, 12-gauge steel legs. This all supports a 1-1/4" thick work surface, topped with high-pressure laminate and surrounded by 3/8" thick edge bumpers. Work Surface: Table top is 1-1/4" thick with high-pressure laminate surface and radius corners. 45 lb. high-density particle board core with backer sheet for balance. Tough 3/8" thick bumper edge molding with horizontal radius for comfort is stapled in place every 8" Frame: 1" x 2", 14-gauge steel tube cross supports welded to 11-gauge steel mounting plate and 1-1/4" square, 12-gauge steel legs. Center support channel of 2" x 3" 14-gauge steel. Features two support channels for added stability. Steel components have tough powdercoat finish. Chrome-plated 1" square 14-gauge lower legs resist scuffing. Minimum order of 10 desks

$775.35
FREE SHIPPING
Access Workstations feature everything you need in computer workstation furniture, particularly sturdy construction. You'll find all the dependability you want in computer workstation furniture: Its laminated surface stays smart after years of use, and its adjustable steel legs won't bend under the weight of computer equipment. Lift-up doors on the cable port means there's no more bending down or crawling on the floor to manage wires. Worksurface: The 1-1/4" thick work surface consists of a 45-lb. high-density particle board core with a . 030" high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 3/8" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. Legs: The legs are attached to the pre-drilled holes in the top with 12, #10 5/8" screws through a 3-1/8"W x 18"L 14-gauge steel mounting plate. The mounting plate is welded to 2, 1" square 14-gauge steel tube legs which is welded to a 1" square 14-gauge steel tube and adjust in height from 22" to 32" in 1" increments. the adjustment for each leg is secured with 2, 3/4" - 16 x . 675 Allen screws. The right and left leg both include the Smith System patented backpack peg allowing for either inside or outside positioning. the legs are tied together for added strength with a 6" high 18-gauge steel panel and 4, Connector Bolts. Legs have 1" adjusting leveling glides. Wire Management: Access comes with a keylocking 6" deep access door that is accessible from the top side of the unit. The 6" deep has cutouts for wire management. Below the door is a fully welded wire manager that is 5-3/8" x 6". the manager has grommet holes in the end to allow wires to be run from station to station with no exposed wiring. Access slots in the front allow easy CPU cable routing into the manager.

$389.40
This ADA Student desk is designed to meet the special needs of students with disabilities. A hand crank on the underside of the work surface allows easy height adjustment, allowing the desk to be fitted to the individual student. The strong work surface can support up to 200 lbs. and features a durable high-pressure laminate surface and a tough 3/8" thick bumper edge molding that's shaped for comfort. Work Surface: Measures 1-1/4" thick with high-pressure laminate surface and radius corners. 45-lb. high density particle board core with bracker sheet for balance. Laminate surface offers a tough 3/8" thick bumper edge molding with horizontal radius for comfort and is stapled every 8". The hand crank is welded to a fully enclosed, trouble-free mechanism on drive system. It is maintenance free with steel threaded rods running through brass threaded bushing. A telescoping steel-tube frame is fully welded to upper and lower components for a solid structure. Frame: The upper frame section consists of 14-gauge steel drive housing welded to 1-1/4" diameter steel guide tubes. Full width drive housing supports work surface. Lower frame section consists of 14-gauge steel cross brace welded to base foot of 1-3/16" x 2" 14-gauge steel tube which is welded to pedestals of 1-1/8" diameter 14-gauge steel tube. the bases have a color matched lockable end cap/glide combination that resists tampering. Frame has tough powdercoat Finish. Wire management modesty panel has 16" high 18-gauge steel panel with cable port holes and cable tray for excess wires.

$134.95
The Arc Desk is a classroom desk with a unique shape that creates flexible, contemporary solutions for learning. Place two Arc Desks together for one-on-one student interaction, or place eight together to make a small group circle of classroom desks. The high-pressure plastic laminate surface offers great durability, making the Arc Desk a favorite long-lasting classroom desk. The 1" thick work surface consists of a 45 lb. density particle board core with a . 030 high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 3/8" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The sides of the Arc Desk are cut at a 22. 5-degree angle to allow for several grouping options for the instructor. The top measures 22"d x 35"w at the widest points. The frame is attached to the pre-drilled holes in the top with (12) #10 x " screws through a 3 "W x 22"L 14-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 16-gauge steel Y-shaped tubes which is welded to a 1" x 2" 14-gauge vertical leg support. The legs adjust in height from 22" to 30" in 1" increments. The adjustment for each leg is secured with (2) 3"-16 x . 675" Allen screws. All open ends on the 16-gauge tubing will be capped with color matched plastic end caps. The bases have a color matched lockable end cap/glide combination that resists tampering. The right and left leg both include the Smith System patented backpack peg allowing for either inside or outside positioning. The legs are tied together for added strength with a 1" x 2" 14-gauge steel crossbar that supplies a rigid long lasting piece of furniture.

$356.35
FREE SHIPPING
This booktruck with the flat shelves are ideal for bulkier books or library items. They also have the strong welded construction that can carry 400 lbs. of books and other materials. This Book Truck consists of (2) Frames, (2) End Panels, and (3) Flat Shelves. The End Panels consist of 20-gauge steel full height panels welded to 1" square 18-gauge steel tubing Frame with formed in handles that radius for added comfort and ease of movement. The Shelves are constructed of 20- gauge steel that are 34" long x 17-9/16" deep x 1" high edge. The shelves sport a 12" clearance between shelves and are welded to the frames and end panels of the Book Truck. All Book Trucks feature 4" diameter dual wheel casters with soft tread for quiet operation. Dual wheels have no saddle that may damage surrounding furniture. Specifications: Features 4" dual-wheel soft tread casters Features three flat shelves Overall Dimensions: 18"D x 36"W x 43"H Weight: 62 lbs.

$245.00
The Planner Activity Table is ideal for all kinds of classroom activities. The heavy-duty construction contributes to a sturdy work surface that won't sag, and a leveling glide on each table leg allows for stability on uneven floors. The Planner Activity Table is shipped ready to assemble. The Planner Activity Table accommodates lower grades to ADA. Minimum order of 10 tables Shown with Optional Chair, Model 02600 (see below)

$694.25
FREE SHIPPING
Access Workstations feature everything you need in computer workstation furniture, particularly sturdy construction. You'll find all the dependability you want in computer workstation furniture: Its laminated surface stays smart after years of use, and its adjustable steel legs won't bend under the weight of computer equipment. Lift-up doors on the cable port means there's no more bending down or crawling on the floor to manage wires. Worksurface: The 1-1/4" thick work surface consists of a 45-lb. high-density particle board core with a . 030" high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 3/8" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. Legs: The legs are attached to the pre-drilled holes in the top with 12, #10 5/8" screws through a 3-1/8"W x 18"L 14-gauge steel mounting plate. The mounting plate is welded to 2, 1" square 14-gauge steel tube legs which is welded to a 1" square 14-gauge steel tube and adjust in height from 22" to 32" in 1" increments. the adjustment for each leg is secured with 2, 3/4" - 16 x . 675 Allen screws. The right and left leg both include the Smith System patented backpack peg allowing for either inside or outside positioning. the legs are tied together for added strength with a 6" high 18-gauge steel panel and 4, Connector Bolts. Legs have 1" adjusting leveling glides. Wire Management: Access comes with a keylocking 6" deep access door that is accessible from the top side of the unit. The 6" deep has cutouts for wire management. Below the door is a fully welded wire manager that is 5-3/8" x 6". the manager has grommet holes in the end to allow wires to be run from station to station with no exposed wiring. Access slots in the front allow easy CPU cable routing into the manager.

$58.85
Anyone who's had to stack or re-arrange classroom chairs will appreciate the light weight of these chairs. They're easy to stack and feature a durable X-frame construction. Ergonomic seat and back with compound curve and waterfall front edge. All-welded steel tubular frame with chrome finish. Seat and Back: The seat and back are constructed of a compound ABS plastic for durability and strength. The surface of the seat and back is lightly textured to keep students in place. Resists scratching, cracking and staining. The back has 3 steel inserts molded into the plastic and attached to the frame giving it a steel-to-steel connection. The seat is held in place on the frame with 4 screws from the under side of the chair. Both the seat and back have no through rivets or screws to snag clothes or hair. Seat: 16" wide x 16" deep Back: 16"wide x 8" high Frame: Chair has space saving X" frame design. Features proper 4 post styling with cross over structural steel tubes fully MIG welded for maximum strength. Legs are will be constructed of 1" diameter 16-gauge steel tube. The back brace is " diameter 14-gauge steel tube MIG welded to the base at four points. The frame and legs have a heavy duty chrome finish. Specifications : Durable X-Frame Construction All-welded Tubular frame Overall Dimensions: 20"D x 21"W x 13-12"H Weight: 8 lbs. Minimum order of 6 chairs

$184.00
Sturdy, stable Planner two-student Desks and Tables are designed to accommodate loads of up to 200 lbs. The strength to handle heavy books and equipment comes from their signature "H" frame construction and substantial work surface. Box-welded modesty panels add even more rigidity. Four sizes available in 20" and 24" depths, adjustable legs. Includes Steel Book Boxes Model 17190. The 7/8" thick work surface consists of a 45 lb. density particle 6" board core with a . 030 high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features " bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The frame is attached to the pre-drilled holes in the top with (12) #10 x 5/8" screws through a 3-1/8"W x 18"L 14-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 14-gauge steel tube legs which is welded to a 1" square 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 22" to 32" in 1" increments. The adjustment for each leg is secured with (2) 3-3/4"-16 x . 675" Allen screws. The right and left leg both include the Smith System patented backpack peg allowing for either inside or outside positioning. The legs are tied together for added strength with a 6" high 18-gauge steel panel and (4) Connector Bolts. Legs have 1" adjusting leveling glides. com Specifications: Includes Two Steel Book Boxes Model 17190 High-Pressure Laminate surface Easy Assembly Minimum order of 10 desks

$255.94
Husky Tables feature big, 1-3/4" diameter 17-gauge steel tube legs. Foot sock is tough nylon. Telescoping legs adjust on 1" centers 22"-30" high. Legs are secured to top with mounting brackets pre-installed in tops. Table tops are 1-1/4" thick, with a high-pressure laminate bonded to a 45-lb. particle board core with backer sheet. Tops also feature a 3/8" thick bumper edge stapled every 6" to 8" to stay in place. Minimum order of 10 tables

$163.85
The single-student Planner Desk is a classroom performer for several reasons. It's a classroom performer because of its strength and stability. It's designed to accommodate loads of up to 200 lbs. The strength to handle heavy books and equipment comes from its signature "H" frame construction and substantial work surface. Its box-welded modesty panel adds even more rigidity. The 7/8" thick work surface consists of a 45 lb. density particle 6" board core with a . 030 high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features " bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The frame is attached to the pre-drilled holes in the top with (12) #10 x 5/8" screws through a 3-1/8"W x 18"L 14-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 14-gauge steel tube legs which is welded to a 1" square 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 22" to 32" in 1" increments. The adjustment for each leg is secured with (2) 3"-16 x . 675" Allen screws. The right and left leg both include the Smith System patented backpack peg allowing for either inside or outside positioning. The legs are tied together for added strength with a 6" high 18-gauge steel panel and (4) Connector Bolts. Legs have 1" adjusting leveling glides. Minimum order of 10 desks

$159.75
The single-student Planner Desk is a classroom performer for several reasons. It's a classroom performer because of its strength and stability. It's designed to accommodate loads of up to 200 lbs. The strength to handle heavy books and equipment comes from its signature "H" frame construction and substantial work surface. Its box-welded modesty panel adds even more rigidity. The 7/8" thick work surface consists of a 45 lb. density particle 6" board core with a Hard Plastic surface and a . 020" melamine backer sheet. The edge of the work surface features 1/4" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The frame is attached to the pre-drilled holes in the top with (12) #10 x 5/8" screws through a 3-1/8"W x 18"L 14-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 14-gauge steel tube legs which is welded to a 1" square 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 22" to 32" in 1" increments. The adjustment for each leg is secured with (2) 3"-16 x . 675" Allen screws. The right and left leg both include the Smith System patented backpack peg allowing for either inside or outside positioning. The legs are tied together for added strength with a 6" high 18-gauge steel panel and (4) Connector Bolts. Legs have 1" adjusting leveling glides. Minimum order of 10 desks Shown with Optional Chair, Model 02600 (See Below)