Smith System School Furniture

Smith System School Furniture
$297.50
The Planner Activity Table is ideal for all kinds of classroom activities. The heavy-duty construction contributes to a sturdy work surface that won't sag, and a leveling glide on each table leg allows for stability on uneven floors. The Planner Activity Table is shipped ready to assemble. The Planner Activity Table accommodates lower grades to ADA. Minimum order of 10 tables Shown with Optional Chair, Model 02600 (see below)

$219.45
By defining a place at the table for four students, our Clover Activity Table helps keep young students settled and on task. To tailor the height of the table to the size of students from K and up, choose legs from three height ranges, 11"-16"h, 15"-24"h or 21"-30"h. All adjust in 1" increments and feature quick mounting plates for easy assembly. Material: The upper leg is made of a 18-gauge 1-1/8" diameter steel tube, protected by a durable powdercoat finish. The 1/4" "V" support brace is welded to the top leg and a 16-gauge mounting plate, which adds stability and strength. Legs attached to an easy-on bracket that is already mounted to the desktop requiring only 1 screw per leg for secure assembly. The 16-gauge 1" diameter steel tube lower leg is chrome-plated tube to resist scuffing. The telescoping leg adjusts in 1" increments, and is tapered to a 5/8" diamater to accept the outside-hold glides. All glides feature outside-hold design which stays stronger and lasts longer, and feature a swivel base and chrome plated steel cover. Worksurface: The 1-1/4" thick work surface consists of a 45 lb. high-density core with a 0. 030" high pressure laminate surface and a 0. 020" backer sheet for balance. The edge features a 3/8" thick bumper edge molding mechanically fasted every 6"-8" to assure a long lasting fit. Tops have easy on brackets for quick assembly of leg sets. Minimum order of 10 tables

$223.86
The round shape is great for hands-on activities and teaching several students. The height adjusts from 21 to 30". Adjusts in 1" increments and features quick mounting plates for easy assembly. Table tops are 1-1/4" thick, with a high-pressure laminate bonded to a 45-lb. particle board core with backer sheet. Tops also feature a 3/8" thick bumper edge with rounded corners and edges, protecting the surface, and students, from bumps and scratches. Minimum order of 10 desks

$173.53
These sturdy, well-built tables can handle anything your students can dish out. Rectangle is the classic shape for activities and hands-on teaching with several students. This Table Adjusts in height from 15" to 24". The legs adjust in 1" increments and feature quick mounting plates for easy assembly. Table tops are 1-1/4" thick, with a high-pressure laminate bonded to a 45-lb. particle board core with backer sheet. Tops also feature a 3/8" thick bumper edge with rounded corners and edges, protecting the surface and students from bumps and scratches. Minimum order of 10 tables

$223.86
The round shape is great for hands-on activities and teaching several students. The height adjusts from 21 to 30". Adjusts in 1" increments and features quick mounting plates for easy assembly. Table tops are 1-1/4" thick, with a high-pressure laminate bonded to a 45-lb. particle board core with backer sheet. Tops also feature a 3/8" thick bumper edge with rounded corners and edges, protecting the surface, and students, from bumps and scratches. Minimum order of 10 tables

$353.64
Our Flower Activity Table helps keep young students settled and on task by defining a individual places at the table for six students. To tailor the height of the table to the size of students from K and up, choose legs from three height ranges, 11"-16"h, 15"-24"h or 21"-30"h. All adjust in 1" increments and feature quick mounting plates for easy assembly. Material: The upper leg is made of a 18-gauge 1-1/8" diameter steel tube, protected by a durable powdercoat finish. The 1/4" "V" support brace is welded to the top leg and a 16-gauge mounting plate, which adds stability and strength. Legs attached to an easy-on bracket that is already mounted to the desktop requiring only 1 screw per leg for secure assembly. The 16-gauge 1" diameter steel tube lower leg is chrome-plated tube to resist scuffing. The telescoping leg adjusts in 1" increments, and is tapered to a 5/8" diamater to accept the outside-hold glides. All glides feature outside-hold design which stays stronger and lasts longer, and feature a swivel base and chrome plated steel cover. Worksurface: The 1-1/4" thick work surface consists of a 45 lb. high-density core with a 0. 030" high pressure laminate surface and a 0. 020" backer sheet for balance. The edge features a 3/8" thick bumper edge molding mechanically fasted every 6"-8" to assure a long lasting fit. Tops have easy on brackets for quick assembly of leg sets. Minimum order of 10 tables

$332.00
The distinctive Contour shape of the Planner Activity Table allows the teacher to present to a small group or to accommodate a large group by joining two tables together. The heavy-duty construction contributes to a sturdy work surface that won't sag, and a leveling glide on each table leg allows for stability on uneven floors. The Planner Activity Table is shipped ready to assemble. The Planner Activity Table accommodates lower grades to ADA. The 1 " thick work surface consists of a 45 lb. density particle board core with a . 030 high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 3/8" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The legs are attached to the pre-drilled holes in the top with (16) #10 x 5/8" wood screws through a 3 "W x 28 34"L 12-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 12-gauge steel tube legs which is welded to a 1" x 2" 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 24" to 34" in 1" increments. Leveling glides are on each table leg allowing for stability on uneven floors. The adjustment for each leg is secured with (2) 3"-16 x . 675" Allen screws. The center support channel is 2" x 3" 14-gauge steel, with 11-gauge steel end plates for maximum stability. The support channel is connected to the legs by (4) connector bolts. Minimum order of 10 desks Shown with Optional Chair, Model 00520 (see below)

$315.40
The Planner Activity Table is ideal for all kinds of classroom activities. The heavy-duty construction contributes to a sturdy work surface that won't sag, and a leveling glide on each table leg allows for stability on uneven floors. The Planner Activity Table is shipped ready to assemble. The Planner Activity Table accommodates lower grades to ADA. Adjustable from 24-34" high. The 1 " thick work surface consists of a 45 lb. density particle board core with a . 030 high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 3/8" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The legs are attached to the pre-drilled holes in the top with (16) #10 x 5/8" wood screws through a 3 "W x 28 34"L 12-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 12-gauge steel tube legs which is welded to a 1" x 2" 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 24" to 34" in 1" increments. Leveling glides are on each table leg allowing for stability on uneven floors. The adjustment for each leg is secured with (2) 3"-16 x . 675" Allen screws. The center support channel is 2" x 3" 14-gauge steel, with 11-gauge steel end plates for maximum stability. The support channel is connected to the legs by (4) connector bolts. Minimum order of 10 desks Shown with Optional Chair, Model 02600 (see below)

$372.70
FREE SHIPPING
Solid, H-frame construction ensures that these tables won't tip under heavy equipment. They stand up to years of student use, and just about anything else you put them through. Work Surface: This planner table's heavy-duty construction contributes to a sturdy work surface that won't sag. Leveling glides on each leg allow for stability on uneven floors. Full 10" of height adjustment from 22" to 32" high. Accomodates lower grades to ADA. 200-lb. load capacity makes the table applicable for many uses. Table top measures 1-1/4" thick with high pressure laminate surface and radius corners. 45-lb. high-density particle board core with backer sheet for balance. Tough 3/8" thick bumper edge molding with horizontal radius for comfort is stapled in place every 8". tops have cutaways in rear to route cables to the wire manager. Post leg tables feature welded 'H' frame end pairs with backpack peg. Each pair is constructed of 14-gauge steel mounting plate with 1" x 1" 14-gauge cross support tube welded to 1-1/4" square 14-gauge corner legs. Backpack peg welded to cross support tube. Leg ends attach to 6" heigh 16-gauge modesty panel to corners, box welded for rigidity. Chrome-plated 1" square 14-gauge lower legs resist scuffing. 1" adjustable leveling glides provide stability on uneven floors. Adjustable table height from 22" up to 32" in 1" increments. Modesty Panel Wire Way: 8" high 16-gauge steel modesty panel box welded for added strength. Grommets in rear for easy access from rear cutaways in table top.

$203.44
The round shape is great for hands-on activities and teaching several students. The height adjusts from 21 to 30". Adjusts in 1" increments and features quick mounting plates for easy assembly. Table tops are 1-1/4" thick, with a high-pressure laminate bonded to a 45-lb. particle board core with backer sheet. Tops also feature a 3/8" thick bumper edge with rounded corners and edges, protecting the surface, and students, from bumps and scratches. Minimum order of 10 desks

$475.30
FREE SHIPPING
Focusing on lessongs can be a challenge for students of all ages. These carrels can be a great solution to this problem. These versatile carrels can be switched from desk height to kiosk height by simply reversing the back panel. Its work surface can easily support a computer and offers cutouts to accommodate computer wiring. Set the work surface at 28" high to serve as a desk/workstation or at 36" high to serve as a kiosk for patron use. A modular unit, it offers unlimited expandability. This is an adder piece that requires to connect to a Carrel Starter or another Carrel Adder piece connected to a starter piece. Materials: The 1" thick work surface consists of a 45-lb. high-density particle board core with a . 030" high-pressure laminate surface and a . 020" melamine backer sheet. The edge of the work surface comes pre-drilled for ease of installation and is finished with a 3/8" edge t-molding. The 1" thick side panels consists of the same 45-lb. high-density particle board core with a . 030" high-pressure laminate on both sides, and the edge if wrapped with a 3/8" t-mold. Each of the side panels is finished with a 16-gauge 1" x 2" steel foot that has nylon end caps with 1" adjustable leveling glides that provide stability on uneven floors. The back panel is an 18-gauge steel panel and is reversible to allow the user to set the work surface at either a 28" desk height for sitting or a 36" kiosk height for standing. For added strength the side panels are tied togetehr with a 14-gauge steel tube cross bar at the foot.

$347.25
FREE SHIPPING
These book trucks are a handy companion to the library or classroom, carrying up to 400 lbs. of books, paper, and projects. They move easily through aisles on soft-tread, dual wheel casters that won't shimmy like single wheels. Specifications: Material: This Book Truck consists of (2) Frames, (2) End Panels, and (3) Sloping Shelf Weldments. The End Panels consist of 20-gauge steel full height panels welded to 1" square 18-gauge steel tubing Frame with formed in handles that radius for added comfort and ease of movement. The Shelves are constructed of 20-gauge steel double sided sloping shelves that are 34" long x 7-3/4" deep on each side and a 6" high back. The shelves sport a 16-1/2" clearance between shelves and are welded to the frames and end panels of the Book Truck. All Book Trucks feature 4" diameter dual wheel casters with soft tread for quiet operation. Dual wheels have no saddle that may damage surrounding furniture. Product Dimensions: 18"d X 36"w X 36"h Weight: 54 lbs.

$332.00
The distinctive Contour shape of the Planner Activity Table allows the teacher to present to a small group or to accommodate a large group by joining two tables together. The heavy-duty construction contributes to a sturdy work surface that won't sag, and a leveling glide on each table leg allows for stability on uneven floors. The Planner Activity Table is shipped ready to assemble. The Planner Activity Table accommodates lower grades to ADA. The 1 " thick work surface consists of a 45 lb. density particle board core with a . 030 high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 3/8" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The legs are attached to the pre-drilled holes in the top with (16) #10 x 5/8" wood screws through a 3 "W x 28 34"L 12-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 12-gauge steel tube legs which is welded to a 1" x 2" 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 24" to 34" in 1" increments. Leveling glides are on each table leg allowing for stability on uneven floors. The adjustment for each leg is secured with (2) 3"-16 x . 675" Allen screws. The center support channel is 2" x 3" 14-gauge steel, with 11-gauge steel end plates for maximum stability. The support channel is connected to the legs by (4) connector bolts. Minimum order of 10 tables Shown with Optional Chair, Model 00520 (see below)

$406.14
FREE SHIPPING
Solid, H-frame construction ensures that these tables won't tip under heavy equipment. They stand up to years of student use, and just about anything else you put them through. Work Surface: This planner table's heavy-duty construction contributes to a sturdy work surface that won't sag. Leveling glides on each leg allow for stability on uneven floors. Full 10" of height adjustment from 22" to 32" high. Accomodates lower grades to ADA. 200-lb. load capacity makes the table applicable for many uses. Table top measures 1-1/4" thick with high pressure laminate surface and radius corners. 45-lb. high-density particle board core with backer sheet for balance. Tough 3/8" thick bumper edge molding with horizontal radius for comfort is stapled in place every 8". tops have cutaways in rear to route cables to the wire manager. Post leg tables feature welded 'H' frame end pairs with backpack peg. Each pair is constructed of 14-gauge steel mounting plate with 1" x 1" 14-gauge cross support tube welded to 1-1/4" square 14-gauge corner legs. Backpack peg welded to cross support tube. Leg ends attach to 6" heigh 16-gauge modesty panel to corners, box welded for rigidity. Chrome-plated 1" square 14-gauge lower legs resist scuffing. 1" adjustable leveling glides provide stability on uneven floors. Adjustable table height from 22" up to 32" in 1" increments. Modesty Panel Wire Way: 8" high 16-gauge steel modesty panel box welded for added strength. Grommets in rear for easy access from rear cutaways in table top.

$477.90
FREE SHIPPING
Solid, H-frame construction ensures that these tables won't tip under heavy equipment. They stand up to years of student use, and just about anything else you put them through. Work Surface: This planner table's heavy-duty construction contributes to a sturdy work surface that won't sag. Leveling glides on each leg allow for stability on uneven floors. Full 10" of height adjustment from 22" to 32" high. Accomodates lower grades to ADA. 200-lb. load capacity makes the table applicable for many uses. Table top measures 1-1/4" thick with high pressure laminate surface and radius corners. 45-lb. high-density particle board core with backer sheet for balance. Tough 3/8" thick bumper edge molding with horizontal radius for comfort is stapled in place every 8". tops have cutaways in rear to route cables to the wire manager. Post leg tables feature welded 'H' frame end pairs with backpack peg. Each pair is constructed of 14-gauge steel mounting plate with 1" x 1" 14-gauge cross support tube welded to 1-1/4" square 14-gauge corner legs. Backpack peg welded to cross support tube. Leg ends attach to 6" heigh 16-gauge modesty panel to corners, box welded for rigidity. Chrome-plated 1" square 14-gauge lower legs resist scuffing. 1" adjustable leveling glides provide stability on uneven floors. Adjustable table height from 22" up to 32" in 1" increments. Modesty Panel Wire Way: 8" high 16-gauge steel modesty panel box welded for added strength. Grommets in rear for easy access from rear cutaways in table top.

$527.10
FREE SHIPPING
Solid, H-frame construction ensures that these tables won't tip under heavy equipment. They stand up to years of student use, and just about anything else you put them through. Work Surface: This planner table's heavy-duty construction contributes to a sturdy work surface that won't sag. Leveling glides on each leg allow for stability on uneven floors. Full 10" of height adjustment from 22" to 32" high. Accomodates lower grades to ADA. 200-lb. load capacity makes the table applicable for many uses. Table top measures 1-1/4" thick with high pressure laminate surface and radius corners. 45-lb. high-density particle board core with backer sheet for balance. Tough 3/8" thick bumper edge molding with horizontal radius for comfort is stapled in place every 8". tops have cutaways in rear to route cables to the wire manager. Post leg tables feature welded 'H' frame end pairs with backpack peg. Each pair is constructed of 14-gauge steel mounting plate with 1" x 1" 14-gauge cross support tube welded to 1-1/4" square 14-gauge corner legs. Backpack peg welded to cross support tube. Leg ends attach to 6" heigh 16-gauge modesty panel to corners, box welded for rigidity. Chrome-plated 1" square 14-gauge lower legs resist scuffing. 1" adjustable leveling glides provide stability on uneven floors. Adjustable table height from 22" up to 32" in 1" increments. Modesty Panel Wire Way: 8" high 16-gauge steel modesty panel box welded for added strength. Grommets in rear for easy access from rear cutaways in table top.

$173.53
These sturdy, well-built tables can handle anything your students can dish out. Rectangle is the classic shape for activities and hands-on teaching with several students. This Table Adjusts in height from 11" to 16". The legs adjust in 1" increments and feature quick mounting plates for easy assembly. Table tops are 1-1/4" thick, with a high-pressure laminate bonded to a 45-lb. particle board core with backer sheet. Tops also feature a 3/8" thick bumper edge with rounded corners and edges, protecting the surface and students from bumps and scratches. Minimum order of 10 desks

$398.50
The Planner Activity Table is ideal for all kinds of classroom activities. The heavy-duty construction contributes to a sturdy work surface that won't sag, and a leveling glide on each table leg allows for stability on uneven floors. The Planner Activity Table is shipped ready to assemble. The Planner Activity Table accommodates lower grades to ADA. Adjustable from 24-34" high. The 1 " thick work surface consists of a 45 lb. density particle board core with a . 030 high-pressure laminated surface and a . 020" melamine backer sheet. The edge of the work surface features 3/8" bumper edge molding that is mechanically fastened every 6 to 8 inches to assure a long lasting fit. The top is pre-drilled for ease of installation. The legs are attached to the pre-drilled holes in the top with (16) #10 x 5/8" wood screws through a 3 "W x 28 34"L 12-gauge steel mounting plate. The mounting plate is welded to (2) 1" square 12-gauge steel tube legs which is welded to a 1" x 2" 14-gauge steel tube cross bar. The leg inserts are 1" square 14-gauge steel tube and adjust in height from 24" to 34" in 1" increments. Leveling glides are on each table leg allowing for stability on uneven floors. The adjustment for each leg is secured with (2) 3"-16 x . 675" Allen screws. The center support channel is 2" x 3" 14-gauge steel, with 11-gauge steel end plates for maximum stability. The support channel is connected to the legs by (4) connector bolts. Minimum order of 10 tables Shown with Optional Chair, Model 02600 (see below)