Paper Towel Dispenser and Waste Receptacle shall hold and dispense 800 standard multi-fold or 600 standard C-fold paper towels and shall have a waste capacity of 12 gal (46litres). Towel dispenser, door, frame, waste container and cabinet shall be fabricated of alloy 18-8 stainless steel, type 304, 22 gauge All exposed surfaces shall be No 4 satin finish and be protected during shipment with a PVC film easily removable after installation. Towel dispensing slot shall have a fully hemmed-in rolled edge for snag-free dispensing and user safety. Door shall be fabricated in double-pan construction with fiberboard filler and shall be attached to cabinet at side with a full length 3/16"dia. stainless steel multi-staked piano hinge and be held closed with a tumbler lock keyed. Waste container shall have hemmed edges for safety and shall be retained by a tumbler lock keyed. Face trim shall be 1" (25.4mm) wide formed from one piece with no mitres, welding or open seams and have 1/4" (6.35mm) square return to wall. Structural assembly of all components shall be of welded construction. Cabinet shall have no exposed fastening devices or spot welded seams.
Dispenses 600 C-fold or 800 Multi-fold paper towels. Removable 12 gal. (46 L) stainless steel waste receptacle is locked into cabinet. Wall Opening: 15 3/4" x 54 1/2" x 4 1/4" (400 x 1390 x 110 mm). Suggested Mounting Height: 16" (405 mm) from bottom of unit to floor; Barrier-Free, 4" (102 mm).
Towels are self-feeding until supply is depleted. Unit may be reloaded with a partial load in-place and will continue to feed properly. Waste container is emptied manually on cycle determined by maintenance needs. Locking compartment and receptacle retainer prevents unauthorized access or removal.
In stock. Typically ships within 24hrs.