Coat Racks & Mop Holders

$46.95
3 Mop Holders
SPECIFICATION: Mop and Broom Holder Rack shall be fabricated of one-piece hi-hat channel alloy 18-8 stainless steel, type 304, 20 gauge (. 9mm) with No 4 satin finish. Horizontal edges of hi-hat shall return 3-1/2 (89mm) to wall. Mop holder brackets shall be fabricated of cadmium-plated steel and shall be ribbed for rigidity. Each mop holder shall have a pivoting spring loaded serrated rubber cam that shall hold round handles of 7/8 to 1-1/4 (22mm to 32mm) dia. wedged against ribbed clamp plate.
In Stock! May take 1-3 business days to process

Minimum quantity for "ASI 8215 Stainless Steel Mop & Broom Racks" is 1.


$39.55
FREE SHIPPING
Multiple Sizes
Mop Strip: Strip is fabricated of type 304 stainless steel #20 gauge with a #4 satin finish. Top and bottom leading edges are returned to wall 1/2 for rigidity. Mop Holders: Holders are fabricated of plated reinforced steel with a serrated cam type holder. Cam will hold a handle of 1/2-1 1/4 diameter. Select series above. UJ12A: 26L with three (3) holders. (shown in picture) UJ12B: 36L with four (4) holders. UJ12C: 46L with five (5) holders. UJ12D: 56L with six (6) holders. Typically ships within 3 - 5 days.
In Stock! May take 3-5 business days to process

$7.95
1 Mop Holder
Mop Holders: UJ19 plated reinforced steel with serrated cam type hard rubber mop or broom holder. Holds handles 1/2" to 1 1/4" diameter. UJ19 Mop holder can be installed by itself or used in combination with mop strips and shelving. Overall Size: 2 9/16"W x 1 5/16"H x 1 3/16"D Typically ships within 3 - 5 days.
In Stock! May take 3-5 business days to process
+

$16.45
1 Hook
Fabricated of type 304 #14 gauge stainless steel with a #4 satin finish. Single hook. Exposed Mounting.
In Stock! May take 3-5 business days to process
+

$99.75
FREE SHIPPING
3 Mop Holders, 2 Hooks
Shelf: Type 304 #18 ga stainless steel with a #4 satin finish, 8 deep (203mm) bent down 1 1/2 with 1/2 returns back for rigidity and safety. Mop Holders: UJ19 plated reinforced steel with serrated cam type hard rubber mop or broom holder. Holds handles 1/2 to 1 1/4 diameter. Rag Hooks: Type 304 #18 ga stainless steel. Mounting Brackets: Type 304 #16 ga stainless steel with exposed mounting points. Drying Rod: 1/4 diameter stainless steel rod, secured to outside of support/mounting brackets with locking caps. UJ41A: 30"L with 3 holders and 2 hooks. In Stock. Typically ships within 24 - 48hrs.
In Stock! May take 3-5 business days to process
+

$49.55
FREE SHIPPING
Multiple Sizes
Hook Strip: Type 304 #20 ga stainless steel with a #4 satin finish. Ends of strip are returned to wall surface. Hooks: Hooks are fabricated of type 304 #14 gauge stainless steel finished to match strip. Leading edges of hooks are radiused to prevent injury and extends 2 5/8 from strip surface. Verify Style: UJ14A: 26L (660mm) with 3 hooks. (shown in picture) UJ14B: 36L (914mm) with 4 hooks. UJ14C: 46L (1168mm) with 5 hooks. UJ14D: 56L (1422mm) with 6 hooks.
In Stock! May take 3-5 business days to process

$148.95
FREE SHIPPING
3 Mop Holders, 4 Hooks
Shelf: Type 304 #18 ga stainless steel with a #4 satin finish, 8 deep (203mm) bent down 1 1/2 with 1/2 returns back for rigidity and safety. Back: Type 304 #18 ga stainless steel, #4 satin finish. Lower portion has a formed channel for added rigidity to support the mop holders. Mop Holders: UJ19 plated reinforced steel with serrated cam type hard rubber mop or broom holder. Holds handles 1/2 to 1 1/4 diameter. Hooks: Type 304 #14 ga stainless steel. Mounting Brackets: Type 304 #16 ga stainless steel with exposed mounting points. UJ45A: 34" with 3 holders and 4 hooks. In Stock. Typically ships within 24 - 48hrs.
In Stock! May take 3-5 business days to process
+

$53.35
FREE SHIPPING
4 Mop Holders
Mop Strip Shelf: Type 304 #18 ga stainless steel with a #4 satin finish. Upper portion of strip is formed in the shape of a hat channel, that is utilized as a shelf, projects 3 3/4form wall surface. Lower portion is angled to add rigidity and strength to strip. Mop Holders: UJ19 plated reinforced steel with serrated cam type hard rubber mop or broom holder. Holds handles 1/2 to 1 1/4 diameter. Diminsions: 36" Long with 4 holder In Stock. Typically ships within 24 - 48hrs.
In Stock! May take 3-5 business days to process
+

$67.95
FREE SHIPPING
Multiple Sizes
Hook Strip: Type 304 #18 ga stainless steel with a #4 satin finish. Hooks: Fabricated of type 304 #14 gauge stainless steel with a #4 satin finish. Hook has two (2) exposed mounting points. Top and bottom leading edges rounded to form a radius for safety. Verify Style: UJ11A: 24L (610mm) with 3 hooks. UJ11B: 36L (914mm) with 4 hooks. UJ11C: 46L (1168mm) with 5 hooks. Typically ships within 3 - 5 days.
In Stock! May take 3-5 business days to process

$9.95
1 Hook
SPECIFICATION: Heavy Duty Rag and Towel Hook shall be fabricated of alloy 18-8 stainless steel, type 304, 11 gauge with No 4 satin finish and shall be protected during shipment with a PVC film easily removable after installation.
+

Minimum quantity for "ASI 1306 Stainless Steel Heavy Duty Utility Hook" is 1.


$24.90
1 Hook
Security hook bracket is fabricated of type 304 #11 gauge stainless steel with two exposed mounting point locations. Hook is fabricated of #7 gauge stainless steel and is secured to bracket by means of a tamper resistant stainless steel spanner screw and rubber friction washers. Tension adjustment is made by the use of a spanner tool. (Not supplied) Overall Size: 1W x 4 5/16H x 3D Typically ships within 3 - 5 days.
In Stock! May take 3-5 business days to process
+

$123.50
FREE SHIPPING
Multiple Sizes, Multiple Sizes
SPECIFICATION: Utility Shelf with Mop Holders, Drying Rod and Rag Hooks shall be fabricated of alloy 18-8 stainless steel, type 304. Utility shelf shall have 2-1/2" wide hemmed-in edge all around and shall be No. 18 gauge and length shall be as per schedule below. Rubber-cam mop-holders shall be provided in quantity listed in schedule at the face of shelf. A 3/8" dia. stainless steel rod shall be provided to run between the mounting bracket gussets. Mounting brackets shall be No16 gauge. All exposed surfaces shall be No4 satin finish and be protected during shipment with a PVC film easily removable after installation. OPERATION Mop or broom handle is pushed into grip-jaw of pivoting serrated rubber cam with upward motion until it seats behind rib on clamp plate. Spring holds cam against handle. Gravity holds mop clamped in position. General dry janitorial supplies may be stored on shelf. Wet or dry cleaning rags may be hung on hooks as required. Wet cloth items may be hung on drying rod to drip into floor basin (by others). In Stock. Typically Ships Same Day!
In Stock!

Minimum quantity for "ASI 1315 Stainless Utility Shelf with Mop Holders & Rag Hooks" is 1.


$139.75
FREE SHIPPING
4 Hooks
Mounting Strip: Fabricated of type 304 #14 gauge stainless steel with a #4 satin finish. Six (6) exposed mounting points secure unit to wall surface. Hooks: Collapsible hooks are fabricated of stainless steel with a pivoting ball joint that will collapse when excessive weight is applied. (Aprx. 35 lbs. ) Overall Size: 18W x 5 x H x 2 1/8 (Wall to hook) Typically ships within 3 - 5 days.
In Stock! May take 3-5 business days to process
+

$55.95
FREE SHIPPING
Multiple Sizes
SPECIFICATION: Utility Hook Strip shall be fabricated from type 304 stainless steel, alloy 18-8. Mounting channel shall be 20 gauge with top and bottom edges returning 1/2" (13) to wall. Heavy-duty hooks shall be one piece formed of 11 gauge. All exposed surfaces shall have No 4 satin finish. Unit shall be supplied with hooks and mounting holes corresponding with length as per schedule.

Minimum quantity for "ASI 1307 Stainless Steel Utility Hook Strip" is 1.


$168.00
FREE SHIPPING
Multiple Sizes, Multiple Sizes
SPECIFICATION: Shelf with Utility Hooks and Mop Strip shall have shelf and mop strip fabricated of alloy 18-8 stainless steel, type 304, 18 gauge. Utility hooks shall be fabricated of stainless steel 11 gauge. Shelf, utility hooks and mop strip shall have No 4 satin finish and be protected during shipment with a PVC film easily removable after installation. Shelf, back and mop strip shall be one piece construction. Mop strip shall be raised 1/2" (13mm) from wall. Mop holders shall be fabricated of cadmium plated steel and shall be ribbed for rigidity. Pivoting, spring-loaded, serrated rubber cam shall hold round handles of 7/8" to 1-1/4" (22mm to 32mm)dia. wedged against ribbed clamp plate. Mop holders and utility hooks shall be riveted to mop strip. OPERATION The shelf is used to store various self-contained items. Mop or broom handle is pushed into the grip jaw of the pivoting serrated rubber cam with an upward motion until it seats behind the rib on the clamp plate. A spring holds the cam against the handle. Gravity holds the mop clamped in position. Rags, mop heads, towels, etc. , may be hung on the utility hooks. In Stock. Typically Ships Same Day!
In Stock!

Minimum quantity for "ASI 1308 Stainless Steel Shelf w/Hooks & Mop Strip" is 1.


$108.75
FREE SHIPPING
4 Hooks
Mounting Strip: Fabricated of type 304 #14 gauge stainless steel with a #4 satin finish. Six (6) exposed mounting points secure unit to wall surface. Hooks: Type 304 #11 ga stainless steel bracket with #7 gauge stainless steel collapsible hooks are fabricated of stainless steel finished to match plate. Friction washers prevent hook from collapsing. Washers are adjustable to increase or decrease pressure required to collapse hook. Hook will collapse when excessive weight is applied. (Aprx. 35 lbs. ) Overall Size: 18W x 5 x H x 3 (Wall to hook)
In Stock! May take 3-5 business days to process
+

$35.10
1 Hook
Exposed mounted hook is fabricated of type 304 #14 gauge stainless steel with a #4 satin finish. All seams are tig welded and ground smooth. Pivoting ball joint releases when excessive force is applied. (Aprx: 35lbs. ) Back plate has weld nuts to receive 1/4-20 studs. (Nuts and washers not included) with four (4) exposed countersunk mounting points in lieu of concealed. (Fasteners not included)
In Stock! May take 3-5 business days to process
+

$39.85
1 Hook
Concealed mounted hook is fabricated of type 304 #14 gauge stainless steel with a #4 satin finish. All seams are tig welded and ground smooth. Pivoting ball joint releases when excessive force is applied. (Aprx: 35lbs. ) Back plate has weld nuts to receive 1/4"-20 studs. (Nuts and washers not included) Overall Size: 4"W x 4"H x 2 1/4"D Typically ships within 3 - 5 days.
+