Haws HWUACP8SS Barrier-Free Indoor Wall Mounted Water Cooler

Haws model HWUACP8SS pressure drinking water cooler shall deliver a minimum of 8 gph (30.3 LPH) of water at 50°F (10°C) cooled from 80°F (26.7°C) inlet water at 90°F (32.2°C) ambient. Front and side mounted push-pads requiring less than 5 pounds of force to activate that initiate water flow through a flexible hooded rubber bubbler having a non-squirt feature. An internally mounted valve and adjustable stream regulator shall control water flow between 20 and 90 psig. R-134a refrigeration system shall be hermetically sealed and refrigerant flow shall be capillary tube controlled. An adjustable thermostat having an off position shall control refrigeration system. Stainless steel top shall have integral drain strainer. Heavy-duty galvanized frame shall support stainless steel exterior panels. Built-in 100 micron strainer and external stream height adjustment. 115 Volts, 60Hz, Full Load Amps: 4.6, and Rated Watts: 460
Perfect for either public or private settings, our barrier-free electric water coolers are a great fit in indoor environments. Specifically, this type fountain may be placed in settings such as: office buildings, shopping malls, and other indoor environments where there is a demand for a chilled water source and/or wheel chair access. Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine).
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. These conditions may void warranty. Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Haws electric water coolers comply with ARI Standard 1010 and ANSI A117.1, and be listed by Underwriter Laboratories to U.S. and Canadian standards.
Model HWUACP8SS pressure drinking water cooler shall deliver a minimum of 8 gph (30.3 LPH) of water at 50°F (10°C) cooled from 80°F (26.7°C) inlet water at 90°F (32.2°C) ambient. Front and side mounted push pads requiring less than 5 pounds of force to activate that initiate water flow through a flexible hooded rubber bubbler having a non-squirt feature. An internally mounted valve and adjustable stream regulator shall control water flow between 20 and 90 psig. R-134a refrigeration system shall be hermetically sealed and refrigerant flow shall be capillary tube controlled. An adjustable thermostat having an off position shall control refrigeration system. Stainless steel top shall have integral drain strainer. Heavy-duty galvanized frame shall support stainless steel panels. Potable water system components shall comply with the Safe Drinking Water Act Amendments, the 1988 Lead Contamination Control Act and shall be Certified to ANSI/NSF Standard 61, Section 9. Chilled water capacity shall be rated per ARI Standard 1010. Cooler shall be Listed by Underwriters Laboratories Inc. to U.S. and Canadian safety standards. Drinking water cooler shall comply with ANSI A117.1 and ADA frontal approach and protruding object requirements.
Activation
Unit is easily activated by front and side push pads.
Maintenance
Easily serviced with external stream height adjustment and built-in 100 micron strainer.
Bubbler
Flexible rubber hooded bubbler head protects against occasional mishaps.
Finish
Decorative and durable grained stainless steel skin and basin provide an easy to clean surface.
Click here to view Specifications