Haws HWUACP8LSS Bi-Level Barrier Free Wall Mounted Water Cooler

Haws model HWUACP8LSS "Hi-Lo" pressure drinking water cooler shall deliver a minimum of 8 gph (30.3 LPH) of water at 50°F (10°C) cooled from 80°F (26.7°C) inlet water at 90°F (32.2°C) ambient. Each fountain shall have front and side mounted push-pads requiring less than 5 pounds of force to activate that initiate water flow through a flexible hooded rubber bubbler having a non-squirt feature. An internally mounted valve and adjustable stream regulator shall control water flow between 20 and 90 psig. R-134a refrigeration system shall be hermetically sealed and refrigerant flow shall be capillary tube controlled. An adjustable thermostat having an off position shall control refrigeration system. Stainless steel top shall have integral drain strainer. Heavy-duty galvanized frame shall support stainless steel exterior panels. Built-in 100 micron strainer and external stream height. 115 Volts, 60Hz, Full Load Amps: 4.6, and Rated Watts: 460
Perfect for either public or private settings, our "Hi-Lo" barrier-free electric water coolers are a great fit in indoor environments. Specifically, this type fountain may be placed in high areas such as: office buildings, shopping malls, and other indoor environments where there is a demand for a chilled water source and/or wheel chair access. Electric water coolers are not recommended or designed for outdoor applications or enclosed pool areas (chlorine). These conditions may void warranty.
Model meets all current Federal Regulations for the disabled including those in the Americans with Disabilities Act. Haws manufactures drinking fountains, electric water coolers and electric drinking fountains to be lead-free by all known definitions including ANSI/NSF Standard 61, Section 9, California Proposition 65, and the Federal Safe Drinking Water Act. Haws electric water coolers comply with ARI Standard 1010 and ANSI A117.1, and be listed by Underwriter Laboratories to U.S. and Canadian standards.
Barrier-Free
Barrier-free capabilities combined with its ease of use allows for a number of installation location possibilities.
Activation
Unit is easily activated by front and side push pads.
Maintenance
Easily serviced with external stream height adjustment and built-in 100 micron strainer.
Bubbler
Flexible rubber hooded bubbler head protects against occasional mishaps.
Finish
Decorative and durable grained stainless steel skin and basin provide an easy to clean surface.
Click here to view Specifications