Video Overview – ASI 8154 Pass Through Specimen Cabinet

ASI 8154 Pass Through Specimen Cabinet. Recessed Specimen Pass-Through Cabinet shall be fabricated of alloy 18-8 stainless steel, type 304, 18 gauge (1.2mm). Adjustable flange and fixed trim shall be 1″ (25mm) wide formed from one piece with no miters, welding or open seams and have a 1/4″ (6mm) square return to wall or partition. Adjustable flange shall provide an installation range of 1-3/4″ to 5-1/2″ (44mm to 140mm). Structural assembly of all components shall be of welded construction. Doors shall be attached to the edge of unit with a full length 3/16″ (5mm) dia. stainless steel multi-staked piano hinge and shall be held closed with a spring tensioned interlocking mechanism which shall prevent both doors from simultaneous opening. Each door shall have an international decal applied identifying usage. A removable stainless steel drip tray shall be provided at bottom of cabinet. All exposed surfaces shall be No 4 satin finish and shall be protected during shipment with a PVC film easily removable after installation.
Provides a convenient passage from patient area into laboratory. Fabricated of 22 gauge type 304 satin finish stainless steel with self-closing door. Lock prevents doors from both being opened at the same time. Stainless steel tray is removable. Mounts in wall thickness of 1 3/4″ to 5 1/2″. (45 to 135 mm).

Leave a Reply

Your email address will not be published.