Video Overview – Specimen Pass Box Recessed Turntable

ASI 0515 Specimen Pass Box Recessed Turntable shall receive objects up to 5-7/8″ W x 10-7/16″ H x 10″ D (149mm x 265mm x 254mm) and shall rotate 360o between catch stops in either direction. Turntable shall be a fully enclosed compartment with only its 6″ x 10-1/2″ (152mm x 267mm) pass door open and shall be track mounted with ball bearing rotation mechanism at top and bottom. Turntable retaining door shall be hung on side with a 3/16″ (5mm) dia. stainless steel multi-staked piano hinge and shall be held closed with a tumbler lock keyed alike to other ASI washroom equipment. Unit shall be fabricated of alloy 18-8 stainless steel, type 304 (frame shall be 18 gauge; trim shall be 22 gauge) and all exposed surfaces shall have No 4 satin finish and be protected during shipment with a PVC film easily removable after installation. Trim shall adjust for wall thickness of 3-3/8″ (86mm) minimum to 7″ (178mm) maximum and shall be of one-piece construction with no miters or welding 1″ (25mm) wide and returning 1/4″ (6mm) to finished wall.
Specimen container is placed inside the turntable cylinder and is then manually rotated clockwise or counterclockwise 180°
to present the container to the rear opening for retrieval by technician. Service access to the unit is gained by unlocking and
opening the door.

Leave a Reply

Your email address will not be published.